Submarine Cabinet Sound Dampening Alternative

SBIR · Phase: BOTH · Topic DON26BZ05-NV080 · Solicitation 26.BZ

As part of the production of electronic cabinets and consoles, noise mitigation products are installed prior to the installation of the electronic components and cabling. The noise mitigation material of choice for decades has been lead septum foam. Reference 1 is the baseline 53711-3203197 lead septum product. This material is installed with a Pressure Sensitive Adhesive (PSA) backing or adhesive to the inner walls of the enclosures. Depending on the complexity of the electronics assembly, in most applications it is difficult or impossible to remove and replace without first complete removal of the electronics and cabling. The electronic assemblies that require this product need to have minimal time offline. Additionally, reassembly of cable harnesses and wiring can result in electrical faults, so complete system testing after reassembly is required. The Navy needs a product that has performance characteristics equivalent or better than today’s lead septum foam product and with a longer life expectancy (exceeding forty years) than the current foam product being used to meet end-of-life of the COLUMBIA/Dreadnought platforms. This product must also meet the Structureborne Noise MILSPEC (MIL-STD-740-2) criteria for testing [Ref 2]]. This material will be installed in Strategic Systems Programs (SSP) Fire Control, NAV, and TEMPALT equipment cabinets onboard COLUMBIA/Dreadnought SSBNs. In addition to identifying a material with an extended service life, the material attachment methods are expected to have a reduction in time to replace, compared to the 53711-3203197 baseline material. The final product desired is a structureborne noise mitigation material with a defined efficient attachment method. The final product should be able to be reproduced in sheet sizes equivalent to 53711-3203197 baseline material to support needs from the Navy. Work produced in Phase II may become classified. Note: The prospective contractor(s) must be U.S. owned and operated with no foreign influence as defined by 32 U.S.C. § 2004.20 et seq., National Industrial Security Program Executive Agent and Operating Manual, unless acceptable mitigating procedures can and have been implemented and approved by the Defense Counterintelligence and Security Agency (DCSA) formerly Defense Security Service (DSS). The selected contractor must be able to acquire and maintain a secret level facility and Personnel Security Clearances. This will allow contractor personnel to perform on advanced phases of this project as set forth by DCSA and NAVSEA in order to gain access to classified information pertaining to the national defense of the United States and its allies; this will be an inherent requirement. The selected company will be required to safeguard classified material during the advanced phases of this contract IAW the National Industrial Security Program Operating Manual (NISPOM), which can be found at Title 32, Part 2004.20 of the Code of Federal Regulations.

SBIR/STTR 은 미국 중소기업만 지원할 수 있습니다(Small Business Act 법정 요건). • 계열사를 포함해 상시 종업원 500명 이하 • 미국 시민 또는 영주권자 1인 이상이 50%를 초과해 직접 소유·지배 • 미국 내 사업장을 두고 주로 미국 내에서 사업을 영위할 것 • 수행책임자(PI)의 주된 근무처가 신청 기업일 것 출처: https://www.sbir.gov/faq/eligibility-requirements

주 대상 국가

🇺🇸 미국

추가 적격 국가

없음

해외기업 지원

불가

현지 법인

필수

지역 조건

미국 내 사업장을 두고 미국 시민·영주권자가 50%를 초과해 소유한 중소기업만 신청할 수 있습니다(법정 요건).

제출서류 정보가 수집되지 않았습니다 (확인 필요). 공식 공고문에서 직접 확인하세요.

신청 절차 정보가 확인되지 않았습니다.

평가 절차 정보가 확인되지 않았습니다.

신청 절차 정보가 확인되지 않았습니다.

생성: local:rules-v1 · 3시간 전

요구 제출자료가 공고에서 확인되지 않아 기술 공개 범위를 판정할 수 없습니다. 요구 자료 범위가 확인되지 않았습니다. 운영주체는 U.S. Department of War — NAVY입니다. 미확인 항목 8건은 공고문·협약서에서 직접 확인이 필요합니다.

이 분석은 저장된 공고·서류·계약 조건 필드에 근거합니다. 근거가 없는 항목은 “확인 필요”로 표시되며, 아이디어 탈취 여부를 단정하지 않습니다. 생성: local:rules-v1 · 3시간 전

공식 URL

https://www.dodsbirsttr.mil/topics-app/

신청 URL

https://www.dodsbirsttr.mil/topics-app/

최종 수집

2026.08.20

담당자 검수

미검수 (공고 원문 확인 권장)

최초 수집

2026.08.20

데이터 상태

자동 수집 (미검수)

AI 보강

local:rules-v1 · 3시간 전