startup-tips
Sign in
UpcomingR&D programAuto-collected, not reviewed

Low-cost Mid-wave Infrared Focal-Plane Array (FPA) Fabrication through Direct-bond Interconnection

🇺🇸 United States·U.S. Department of War — NAVY(Government)
Funding
Needs verification
Deadline
2027.01.06
D-47
Official noticeApplyOverseas applicants not eligible ExportPDF

Overview

What you need to judge this in 30 seconds

SBIR · Phase: BOTH · Topic DON27BZ02-NV011 · Solicitation 27.BZ

Electro-Optic and Infrared (EO/IR) sensors are used in a wide variety of applications, such as navigation, wide-area surveillance, and targeting. Operating in the visible and near-IR bands, EO sensors are available with small pixels and in large arrays at low cost, because the Si-detector wafer and Si-ROIC wafer can be 3D-integrated directly through wafer-to-wafer bonding with high yield at high volume based on material and complementary metal-oxide-semiconductor (CMOS)-process compatibility. By contrast, sensors operating in the MWIR employ III-V detector materials, which are not CMOS-process compatible, while III-V epi-layer detectors cannot be epitaxially grown directly on Si, as required to produce the crystalline order of high-quality detectors [Refs 1-2]. Instead, the III-V detector epi-layer is grown on a lattice-compatible substrate wafer, which is then flip-chip bonded to a Si-ROIC through a dense array of sub-pixel indium bumps placed on each wafer, followed by detector-substrate removal. The technically demanding process of depositing, aligning, and compressing the dense arrays of indium bumps on detector and ROIC die, results in a labor-intensive, inefficient, low-yield process for IR FPA fabrication, which greatly increases cost. In recent years, 3D-heterogeneous integration has enabled a single integrated chip of greater overall functionality to be realized at reduced cost by assembling multiple smaller chips, each having unique functionality, material, node size, and/or foundry origin. Direct-bond interconnection (DBI) [Refs 3-5] is a 3D-heterogeneous integration technique that can potentially enable low-cost MWIR FPA fabrication. In principle, DBI should enable very large format FPAs with small pixels to be fabricated, as the process is largely independent of wafer and pixel size, in contrast to conventional bump-bonding. Moreover, the DBI process utilizes a temperature range that is compatible with MWIR IR detector materials. The goal of this SBIR topic is to demonstrate the use of DBI or a similar process for fabrication of high-performance, large format, small-pixel, MWIR FPAs at low cost with the objective of refining the technique sufficiently to potentially replace conventional bump-bonding.

Category
R&D
Industry
Needs verification
Technology
Needs verification
Target stage
Needs verification
Project duration
Needs verification
Estimated preparation
Needs verification

Funding

Award size and how it is paid

Award range
Needs verification
Currency
USD
Total programme budget
Needs verification
Support type
Needs verification
Co-funding
Needs verification
Matching fund
Needs verification
Disbursement
Needs verification
Note
-

Eligibility

Can we actually apply?

Check whether we can applyEnter where you are incorporated, how old you are and how big — we compare it against this announcement and tell you what would unlock it. No sign-in needed.

SBIR/STTR 은 미국 중소기업만 지원할 수 있습니다(Small Business Act 법정 요건). • 계열사를 포함해 상시 종업원 500명 이하 • 미국 시민 또는 영주권자 1인 이상이 50%를 초과해 직접 소유·지배 • 미국 내 사업장을 두고 주로 미국 내에서 사업을 영위할 것 • 수행책임자(PI)의 주된 근무처가 신청 기업일 것 출처: https://www.sbir.gov/faq/eligibility-requirements

Company age
Needs verification
Employees
0명 ~ 500명
Revenue limits
Needs verification
Consortium
Needs verification

Location Requirements

Geography and legal-entity conditions

Primary country
🇺🇸 United States
Also eligible
None
Foreign companies
No
Local entity
Needs verification
Location condition
미국 내 사업장을 두고 미국 시민·영주권자가 50%를 초과해 소유한 중소기업만 신청할 수 있습니다(법정 요건).

Required Documents

Required/optional · issuer · difficulty · validity · cautions

Document requirements were not captured (needs verification). Check the official announcement.

Application Process

How you apply

Application process not captured.

Evaluation

Review process and criteria

Evaluation process not captured.

Timeline

Announcement → intake → review → agreement → execution

Process steps were not captured.

Equity & Financial Terms

Equity, loans and contract conditions

Equity required
Needs verification
Loan
Non-dilutive grant
Duplicate funding
Needs verification
IP ownership
Needs verification
Deliverable ownership
Needs verification
Exclusivity
Needs verification
Right of first refusal
Needs verification
Audit & settlement
Needs verification

Risk Intelligence

Should we apply at all? — five dimensions plus an overall score (lower is safer)

No risk assessment yet. Re-analyse from Admin.

IP / Idea Protection

How much of your technology and idea you must disclose

No IP assessment yet.

AI Analysis

Pros · cons · difficulty · competition · attractiveness

Preparation difficultyNeeds verification

From paperwork and review stages

Competition (estimate)Needs verification

Heuristic from award size and type

AttractivenessNeeds verification

Amount, terms and IP combined

Overall riskNeeds verification

Weighted average of five dimensions

Pros
  • Needs verification
Cons
  • Needs verification
Cautions
  • Nothing flagged

Similar Programs

Comparable by type, country and technology

Source & Provenance

Every value carries its source URL and fetch time

Last fetched
2026.11.15
Human review
Not reviewed — check the official announcement
First seen
2026.11.15
Data status
Auto-collected, not reviewed
AI enrichment
Needs verification
Snapshot history
  • · 5d ago — 최초 수집 (b5009a6d)