Low-cost Mid-wave Infrared Focal-Plane Array (FPA) Fabrication through Direct-bond Interconnection
Overview
30초 안에 판단해야 할 핵심 정보
SBIR · Phase: BOTH · Topic DON27BZ02-NV011 · Solicitation 27.BZ
Electro-Optic and Infrared (EO/IR) sensors are used in a wide variety of applications, such as navigation, wide-area surveillance, and targeting. Operating in the visible and near-IR bands, EO sensors are available with small pixels and in large arrays at low cost, because the Si-detector wafer and Si-ROIC wafer can be 3D-integrated directly through wafer-to-wafer bonding with high yield at high volume based on material and complementary metal-oxide-semiconductor (CMOS)-process compatibility. By contrast, sensors operating in the MWIR employ III-V detector materials, which are not CMOS-process compatible, while III-V epi-layer detectors cannot be epitaxially grown directly on Si, as required to produce the crystalline order of high-quality detectors [Refs 1-2]. Instead, the III-V detector epi-layer is grown on a lattice-compatible substrate wafer, which is then flip-chip bonded to a Si-ROIC through a dense array of sub-pixel indium bumps placed on each wafer, followed by detector-substrate removal. The technically demanding process of depositing, aligning, and compressing the dense arrays of indium bumps on detector and ROIC die, results in a labor-intensive, inefficient, low-yield process for IR FPA fabrication, which greatly increases cost. In recent years, 3D-heterogeneous integration has enabled a single integrated chip of greater overall functionality to be realized at reduced cost by assembling multiple smaller chips, each having unique functionality, material, node size, and/or foundry origin. Direct-bond interconnection (DBI) [Refs 3-5] is a 3D-heterogeneous integration technique that can potentially enable low-cost MWIR FPA fabrication. In principle, DBI should enable very large format FPAs with small pixels to be fabricated, as the process is largely independent of wafer and pixel size, in contrast to conventional bump-bonding. Moreover, the DBI process utilizes a temperature range that is compatible with MWIR IR detector materials. The goal of this SBIR topic is to demonstrate the use of DBI or a similar process for fabrication of high-performance, large format, small-pixel, MWIR FPAs at low cost with the objective of refining the technique sufficiently to potentially replace conventional bump-bonding.
- 카테고리
- R&D
- 산업
- 확인 필요
- 기술
- 확인 필요
- 대상 단계
- 확인 필요
- 사업기간
- 확인 필요
- 예상 준비기간
- 확인 필요
Funding
지원 규모와 지급 방식
- 지원금 범위
- 확인 필요
- 통화
- USD
- 총 사업예산
- 확인 필요
- 지원방식
- 확인 필요
- 자부담
- 확인 필요
- Matching Fund
- 확인 필요
- 지급방식
- 확인 필요
- 비고
- -
Eligibility
지원자격 — 우리가 지원 가능한가?
SBIR/STTR 은 미국 중소기업만 지원할 수 있습니다(Small Business Act 법정 요건). • 계열사를 포함해 상시 종업원 500명 이하 • 미국 시민 또는 영주권자 1인 이상이 50%를 초과해 직접 소유·지배 • 미국 내 사업장을 두고 주로 미국 내에서 사업을 영위할 것 • 수행책임자(PI)의 주된 근무처가 신청 기업일 것 출처: https://www.sbir.gov/faq/eligibility-requirements
- 설립 연차
- 확인 필요
- 직원수
- 0명 ~ 500명
- 매출 조건
- 확인 필요
- 컨소시엄
- 확인 필요
Location Requirements
지역·법인 조건
- 주 대상 국가
- 🇺🇸 미국
- 추가 적격 국가
- 없음
- 해외기업 지원
- 불가
- 현지 법인
- 확인 필요
- 지역 조건
- 미국 내 사업장을 두고 미국 시민·영주권자가 50%를 초과해 소유한 중소기업만 신청할 수 있습니다(법정 요건).
Required Documents
필수/선택 · 발급처 · 난이도 · 유효기간 · 주의사항
제출서류 정보가 수집되지 않았습니다 (확인 필요). 공식 공고문에서 직접 확인하세요.
Application Process
신청 절차
신청 절차 정보가 확인되지 않았습니다.
Evaluation
평가 절차와 기준
평가 절차 정보가 확인되지 않았습니다.
Timeline
공고 → 접수 → 평가 → 협약 → 수행
신청 절차 정보가 확인되지 않았습니다.
Equity & Financial Terms
지분·융자·계약 조건
- 지분 요구
- 확인 필요
- 융자 여부
- 무상 지원
- 중복수혜
- 확인 필요
- IP 귀속
- 확인 필요
- 결과물 소유권
- 확인 필요
- 독점권
- 확인 필요
- 우선협상권
- 확인 필요
- 정산·감사
- 확인 필요
Risk Intelligence
지원해도 괜찮은가? — 5개 축과 종합 점수 (낮을수록 안전)
Risk 분석 결과가 없습니다. Admin에서 재분석을 실행하세요.
IP / Idea Protection
기술과 아이디어를 어디까지 공개해야 하는가
IP 분석 결과가 없습니다.
AI Analysis
장단점 · 난이도 · 경쟁강도 · 매력도
서류·평가 단계 기반
규모·유형 기반 추정치
금액·조건·IP 종합
5개 축 가중 평균
- 확인 필요
- 확인 필요
- 특이사항 없음
Similar Programs
유형·국가·기술이 유사한 사업
- Cleaner for the Time Domain Reflectometer Tank Level Indicator
🇺🇸 미국 · R&D 과제 · U.S. Department of War — NAVY
확인 필요D-5 - Fire Resistant Joiner Bulkhead
🇺🇸 미국 · R&D 과제 · U.S. Department of War — NAVY
확인 필요D-5 - Intermediate Temperature Cooling Unit
🇺🇸 미국 · R&D 과제 · U.S. Department of War — NAVY
확인 필요D-5 - ONR Open Topic for Low-Cost Heads Up Displays (HUDs) for Virtual & Augmented Reality (VR/AR)
🇺🇸 미국 · R&D 과제 · U.S. Department of War — NAVY
확인 필요D-5 - Input-Output Unit (IOU) for Secure Processing and Routing of Hull, Mechanical, & Electrical (HM&E) and Navigation Signals
🇺🇸 미국 · R&D 과제 · U.S. Department of War — NAVY
확인 필요D-5
Source & Provenance
모든 값은 원본 URL과 수집 시각을 가집니다
- 최종 수집
- 2026.11.15
- 담당자 검수
- 미검수 (공고 원문 확인 권장)
- 최초 수집
- 2026.11.15
- 데이터 상태
- 자동 수집 (미검수)
- AI 보강
- 확인 필요
- PRIMARY
- HTMLSBIR/STTR 자격요건 (법정)
수집: 5일 전
- HTML발주 기관 공식 공고
수집: 5일 전
- · 5일 전 — 최초 수집 (b5009a6d)