startup-tips
로그인
모집예정R&D 과제자동 수집 (미검수)

Wide Pass Bandwidth, High Selectivity, Continuously Tunable Notch Filters

🇺🇸 미국·U.S. Department of War — USAF(정부)
지원금
확인 필요
Deadline
2027.01.06
D-61
공식 공고지원하기해외기업 지원 불가 ExportPDF

Overview

30초 안에 판단해야 할 핵심 정보

SBIR · Phase: BOTH · Topic DAF27BZ02-DV025 · Solicitation 27.BZ

The objective of this topic is to develop miniature, low power, and high selectivity tunable notch filters capable of protecting wideband receivers from large interferers. The effort will target the largest interferers which are in L, S, C, and X bands with tunable notch filters, while allowing pass bandwidths spanning L through Ku bands. Each notch filter must be continuously tunable across a minimum of 3 of the 4 targeted bands (L, S, C, and X) while having a notch depth > 20 dB and a notch bandwidth < 1 % across all tuned frequencies. With a narrow notch bandwidth, each notch filter must be programmable and maintained with an accuracy of 50% of the notch bandwidth and should maintain this accuracy over temperature. The notch filters must be able to reject large interfering signals and therefore should be able to notch receive interference levels greater than 5 dBm. In the bandpass each filter must cover L-Ku band (1-18 GHz) while maintaining a low insertion loss and noise figure of less than 1.5 dB and low passband distortion with an IIP3 > +50 dBm. Each notch filter must be small, less than 3 cc, and should be connectable in series without interfering with one another to notch multiple frequencies in the same receive chain. Finally, the power consumption, including any tuning electronics, of each notch filter should be less than 100 mW. The required metrics are: Passband frequency range (GHz)1 – 18 Maximum passband insertion loss or noise figure (dB) ≤ 1.5 Passband IIP3 (dBm)≥ 50 Notch band tunable frequency range (GHz)1 – 12 Number of bands covered by a single, continuously tunable notch≥ 3 Minimum notch depth across all tuned notch states (dB)≥ 20 Maximum notch fractional bandwidth (%)≤ 1Size (cc)≤ 3 Power consumption (mW)≤ 100

카테고리
R&D
산업
확인 필요
기술
확인 필요
대상 단계
확인 필요
사업기간
확인 필요
예상 준비기간
확인 필요

Funding

지원 규모와 지급 방식

지원금 범위
확인 필요
통화
USD
총 사업예산
확인 필요
지원방식
확인 필요
자부담
확인 필요
Matching Fund
확인 필요
지급방식
확인 필요
비고
-

Eligibility

지원자격 — 우리가 지원 가능한가?

우리 회사가 지원 가능한지 판정하기법인 소재지·업력·규모를 입력하면 이 공고의 자격요건과 대조해 신청 가능 여부와 해제 조건을 알려드립니다. 로그인은 필요하지 않습니다.

SBIR/STTR 은 미국 중소기업만 지원할 수 있습니다(Small Business Act 법정 요건). • 계열사를 포함해 상시 종업원 500명 이하 • 미국 시민 또는 영주권자 1인 이상이 50%를 초과해 직접 소유·지배 • 미국 내 사업장을 두고 주로 미국 내에서 사업을 영위할 것 • 수행책임자(PI)의 주된 근무처가 신청 기업일 것 출처: https://www.sbir.gov/faq/eligibility-requirements

설립 연차
확인 필요
직원수
0명 ~ 500명
매출 조건
확인 필요
컨소시엄
확인 필요

Location Requirements

지역·법인 조건

주 대상 국가
🇺🇸 미국
추가 적격 국가
없음
해외기업 지원
불가
현지 법인
필수
지역 조건
미국 내 사업장을 두고 미국 시민·영주권자가 50%를 초과해 소유한 중소기업만 신청할 수 있습니다(법정 요건).

Required Documents

필수/선택 · 발급처 · 난이도 · 유효기간 · 주의사항

제출서류 정보가 수집되지 않았습니다 (확인 필요). 공식 공고문에서 직접 확인하세요.

Application Process

신청 절차

신청 절차 정보가 확인되지 않았습니다.

Evaluation

평가 절차와 기준

평가 절차 정보가 확인되지 않았습니다.

Timeline

공고 → 접수 → 평가 → 협약 → 수행

신청 절차 정보가 확인되지 않았습니다.

Equity & Financial Terms

지분·융자·계약 조건

지분 요구
확인 필요
융자 여부
무상 지원
중복수혜
확인 필요
IP 귀속
확인 필요
결과물 소유권
확인 필요
독점권
확인 필요
우선협상권
확인 필요
정산·감사
확인 필요

Risk Intelligence

지원해도 괜찮은가? — 5개 축과 종합 점수 (낮을수록 안전)

Risk 분석 결과가 없습니다. Admin에서 재분석을 실행하세요.

IP / Idea Protection

기술과 아이디어를 어디까지 공개해야 하는가

IP 분석 결과가 없습니다.

AI Analysis

장단점 · 난이도 · 경쟁강도 · 매력도

준비 난이도확인 필요

서류·평가 단계 기반

경쟁강도(추정)확인 필요

규모·유형 기반 추정치

지원 매력도확인 필요

금액·조건·IP 종합

종합 Risk확인 필요

5개 축 가중 평균

장점
  • 확인 필요
단점
  • 확인 필요
주의사항
  • 특이사항 없음

Similar Programs

유형·국가·기술이 유사한 사업

Source & Provenance

모든 값은 원본 URL과 수집 시각을 가집니다

최종 수집
2026.11.06
담당자 검수
미검수 (공고 원문 확인 권장)
최초 수집
2026.11.06
데이터 상태
자동 수집 (미검수)
AI 보강
확인 필요
스냅샷 이력
  • · 3시간 전 — 최초 수집 (85c3bcf7)