startup-tips
로그인
모집중R&D 과제자동 수집 (미검수)

Localization, Characterization, and Modeling of Freestream Disturbances in Hypersonic Wind Tunnels

🇺🇸 미국·U.S. Department of War — DARPA(정부)
지원금
확인 필요
Deadline
2026.10.21
D-14
공식 공고지원하기해외기업 지원 불가 ExportPDF

Overview

30초 안에 판단해야 할 핵심 정보

STTR · Phase: BOTH · Topic DPA26TZ06-DV006 · Solicitation 26.TZ

Hypersonic ground-test facilities are critical for evaluating aerodynamic forces, aerothermodynamic heating, and boundary-layer transition (BLT) behavior on high-speed flight vehicles. However, conventional hypersonic wind tunnels are plagued by high-intensity freestream noise present in the test section. Because these disturbances build, focus, and propagate downstream, the fundamental understanding of their evolution may require a potentially deep analysis within the upstream components of the facility. Historically, Laufer [1] established that nozzle-wall turbulent boundary layers radiate downstream-directed Mach waves, making them a principal source of freestream noise. However, especially in high-enthalpy and hypervelocity impulse facilities, the noise field may be further enhanced by complex upstream dynamics that are not optically accessible. Examples of focus areas include, but are not limited to: • Nozzle Throats and Walls (all tunnels): The extreme thermal and velocity gradients in the nozzle throat pose an opportunity for disturbance generation and initiation of turbulence over the nozzle walls. However, severe restricted throat geometry and high heat flux make optical diagnostic access virtually impossible. Diagnostics on tunnel walls are also very challenging although there are examples of previous successful attempts [12]. • Reflected-Shock Tunnels: Reservoir entropy, pressure fluctuations, and driver-gas contamination originate from the complex interaction between the reflected shock wave and the shock tube wall boundary layer [5, 6]. Furthermore, upstream diaphragm particulate-laden flow [7] acts as a continuous source of premature model transition downstream. • Expansion Tubes and Tunnels: Subject to driver-gas acoustic focusing [9, 10], where upstream driver unsteadiness is focused directly into the test gas when sound speed ratios fall into unfavorable ranges. This is exacerbated by secondary diaphragm rupture wave systems [3, 11] propagating from upstream. Characterizing these regions is exceptionally difficult because standard optical diagnostic techniques (such as Femtosecond Laser Electronic Excitation Tagging (FLEET), Focused Laser Differential Interferometry (FLDI), or Rayleigh scattering) require optical-grade line-of-sight window access, which may not withstand the extreme pressures, temperatures, or geometric constraints of regions such as the driver, reservoir, or nozzle throat. To bridge this gap, this STTR topic focuses on the development of specialized diagnostics, informed by multi-fidelity computational flow models ranging in scope from system-scale to component-specific. Collaborative proposals from Small Business Concerns (SBCs) must address the following technical pillars: • Upstream Noise Characterization & Modeling: Modeling facility-specific noise generation phenomena such as transient or statistically steady boundary-layer effects, driver-gas acoustic focusing, diaphragm bursting, starting from the most upstream location ultimately responsible for noise contamination of the test section. • Diagnostics for Non-Optical Zones: Developing and demonstrating novel non-intrusive or minimally intrusive diagnostic systems for flow and acoustic characterization, capable of operating without traditional optical windows. Promising approaches include but are not limited to flush-mounted high-frequency pressure/thermal sensor arrays, micro-bore fiber-optic probes, laser-based acoustic sensing, and/or hybrid data-assimilation techniques that computationally reconstruct upstream flow states from sparse wall measurements.

카테고리
R&D
산업
확인 필요
기술
확인 필요
대상 단계
확인 필요
사업기간
확인 필요
예상 준비기간
확인 필요

Funding

지원 규모와 지급 방식

지원금 범위
확인 필요
통화
USD
총 사업예산
확인 필요
지원방식
확인 필요
자부담
확인 필요
Matching Fund
확인 필요
지급방식
확인 필요
비고
-

Eligibility

지원자격 — 우리가 지원 가능한가?

우리 회사가 지원 가능한지 판정하기법인 소재지·업력·규모를 입력하면 이 공고의 자격요건과 대조해 신청 가능 여부와 해제 조건을 알려드립니다. 로그인은 필요하지 않습니다.

SBIR/STTR 은 미국 중소기업만 지원할 수 있습니다(Small Business Act 법정 요건). • 계열사를 포함해 상시 종업원 500명 이하 • 미국 시민 또는 영주권자 1인 이상이 50%를 초과해 직접 소유·지배 • 미국 내 사업장을 두고 주로 미국 내에서 사업을 영위할 것 • 수행책임자(PI)의 주된 근무처가 신청 기업일 것 출처: https://www.sbir.gov/faq/eligibility-requirements

설립 연차
확인 필요
직원수
0명 ~ 500명
매출 조건
확인 필요
컨소시엄
확인 필요

Location Requirements

지역·법인 조건

주 대상 국가
🇺🇸 미국
추가 적격 국가
없음
해외기업 지원
불가
현지 법인
필수
지역 조건
미국 내 사업장을 두고 미국 시민·영주권자가 50%를 초과해 소유한 중소기업만 신청할 수 있습니다(법정 요건).

Required Documents

필수/선택 · 발급처 · 난이도 · 유효기간 · 주의사항

제출서류 정보가 수집되지 않았습니다 (확인 필요). 공식 공고문에서 직접 확인하세요.

Application Process

신청 절차

신청 절차 정보가 확인되지 않았습니다.

Evaluation

평가 절차와 기준

평가 절차 정보가 확인되지 않았습니다.

Timeline

공고 → 접수 → 평가 → 협약 → 수행

신청 절차 정보가 확인되지 않았습니다.

Equity & Financial Terms

지분·융자·계약 조건

지분 요구
확인 필요
융자 여부
무상 지원
중복수혜
확인 필요
IP 귀속
확인 필요
결과물 소유권
확인 필요
독점권
확인 필요
우선협상권
확인 필요
정산·감사
확인 필요

Risk Intelligence

지원해도 괜찮은가? — 5개 축과 종합 점수 (낮을수록 안전)

Risk 분석 결과가 없습니다. Admin에서 재분석을 실행하세요.

IP / Idea Protection

기술과 아이디어를 어디까지 공개해야 하는가

IP 분석 결과가 없습니다.

AI Analysis

장단점 · 난이도 · 경쟁강도 · 매력도

준비 난이도확인 필요

서류·평가 단계 기반

경쟁강도(추정)확인 필요

규모·유형 기반 추정치

지원 매력도확인 필요

금액·조건·IP 종합

종합 Risk확인 필요

5개 축 가중 평균

장점
  • 확인 필요
단점
  • 확인 필요
주의사항
  • 특이사항 없음

Similar Programs

유형·국가·기술이 유사한 사업

Source & Provenance

모든 값은 원본 URL과 수집 시각을 가집니다

최종 수집
2026.10.07
담당자 검수
미검수 (공고 원문 확인 권장)
최초 수집
2026.10.07
데이터 상태
자동 수집 (미검수)
AI 보강
확인 필요
스냅샷 이력
  • · 1시간 전 — 최초 수집 (00a22c5d)