Engineered Microstructures for Enhanced IR Aperture Performance

SBIR · Phase: BOTH · Topic OSW26BZ06-NV024 · Solicitation 26.BZ

The Navy has demonstrated within its laboratories that a composite ceramic exhibiting IR transparency can be produced with distinct phases, microstructural feature sizes below 100 nm in all phases, and porosity content below 0.1% on component parts as large as 0.4 inch in lateral dimension. Phase identity, crystal structure, phase chemistry, microstructure feature size, and porosity content were established via X-ray diffraction (XRD) and scanning electron microscopy (SEM) cross-sections with energy dispersive spectroscopy (EDS) analysis. Retention of sub-100 nm feature sizes across all phases is critical to achieving the desired mechanical and thermal properties of the composite; porosity above 0.1% similarly degrades mechanical performance. All three specifications -- sub-100 nm microstructural features in all phases, porosity below 0.1%, and Short-Wave to Mid-Wave Infrared (SWIR/MWIR) transparency of at least 80% -- must be achieved at scale for the material to be suitable for transition. Producing IR-transparent composite ceramics meeting these specifications at sample sizes relevant to aperture applications is a significant technical challenge. Conventional ceramic processing routes that rely on mechanical mixing or co-precipitation of constituent phases typically result in microstructural coarsening during densification that precludes achieving sub-100 nm feature sizes in all phases. Innovative powder synthesis and consolidation approaches capable of satisfying all microstructural, porosity, and optical transparency requirements at sample sizes exceeding 2" x 4" x 0.5" are sought. Furthermore, the proposed processes should be industrially scalable in both capacity and final component size, with a path towards producing components in the 3" x 9" range or larger. In addition to these requirements, the composite ceramic must retain its microstructure and IR transparency after exposure to temperatures up to 1200 degrees C for 10 minutes. Phase transformation or grain growth during high-temperature service would degrade both mechanical and optical performance. The composite must also exhibit a low ratio of thermal expansion coefficient (alpha) to thermal conductivity (k). The threshold requirement for alpha/k is 1.0 micrometers/W and the target is 0.5 micrometers/W at 1000C.

SBIR/STTR 은 미국 중소기업만 지원할 수 있습니다(Small Business Act 법정 요건). • 계열사를 포함해 상시 종업원 500명 이하 • 미국 시민 또는 영주권자 1인 이상이 50%를 초과해 직접 소유·지배 • 미국 내 사업장을 두고 주로 미국 내에서 사업을 영위할 것 • 수행책임자(PI)의 주된 근무처가 신청 기업일 것 출처: https://www.sbir.gov/faq/eligibility-requirements

주 대상 국가

🇺🇸 미국

추가 적격 국가

없음

해외기업 지원

불가

현지 법인

필수

지역 조건

미국 내 사업장을 두고 미국 시민·영주권자가 50%를 초과해 소유한 중소기업만 신청할 수 있습니다(법정 요건).

제출서류 정보가 수집되지 않았습니다 (확인 필요). 공식 공고문에서 직접 확인하세요.

신청 절차 정보가 확인되지 않았습니다.

평가 절차 정보가 확인되지 않았습니다.

신청 절차 정보가 확인되지 않았습니다.

Risk 분석 결과가 없습니다. Admin에서 재분석을 실행하세요.

IP 분석 결과가 없습니다.

공식 URL

https://www.dodsbirsttr.mil/topics-app/

신청 URL

https://www.dodsbirsttr.mil/topics-app/

최종 수집

2026.10.07

담당자 검수

미검수 (공고 원문 확인 권장)

최초 수집

2026.10.07

데이터 상태

자동 수집 (미검수)

AI 보강

확인 필요