Agile Wire Harness Manipulation and Installation for Unmanned Aerial Systems

SBIR · Phase: BOTH · Topic DAF27BZ01-DV011 · Solicitation 27.BZ

Context & BackgroundModern Department of Defense (DoD) manufacturing and depot sustainment environments increasingly depend on agile automation to scale up production and maintain rapid operational readiness. While automated assembly technologies have matured substantially for rigid components with predictable geometries, the handling of flexible materials remains a persistent challenge. Specifically, wire harness routing, connector inspection, and insertion operations are ubiquitous across the production lines of Unmanned Aerial Systems (UAS), advanced munitions families, and autonomous collaborative platforms. Currently, these intricate electrical assembly processes represent a bottleneck in UAS assembly operations. Assembly technicians must manually route non-rigid cables through confined structural cavities and execute high-precision connection steps under high-mix, low-volume production conditions. Traditional industrial robotics break down when tasked with these operations because flexible wiring deforms unpredictably during manipulation, completely violating the rigid-part assumptions and fixed, hard-tooled rules of standard automation. Problem, Opportunity, & Unmet Need The complete reliance on manual wire harness installation creates a critical capability deficiency that severely penalizes DoD manufacturing agility and surge capacity. Manual operations are fundamentally non-scalable, meaning production lines cannot dynamically "ramp-to-rate" to meet sudden spikes in theater demand. Furthermore, manual wire routing and insertion introduce human-induced variability, resulting in unquantifiable defects such as partially seated connectors, overstressed wires, or compromised bend radii. These latent defects frequently slip past standard visual inspections and surface as catastrophic electrical or communication failures during critical mission times. Aerospace prime contractors and program offices have identified this manual chokepoint as the largest automation gap in UAS and munitions production. This deficiency creates a major opportunity to implement a flexible automation solution. Resolving this challenge requires a modular, adaptive robotic workcell that handles deformable materials, operates with high positional accuracy in restricted footprints, and can be rapidly retasked between completely different product designs within a single factory shift. Desired Outcome & Technological Improvement The desired outcome of this research and development effort is a fully integrated, single-arm modular robotic manufacturing workcell capable of autonomously handling the core manipulation and installation scenarios for flexible UAS and munitions wiring harnesses. Shifting the technology from manual assembly to adaptive, sensor-driven automation will fundamentally advance the DoD technological state of the art by achieving the following targeted improvements: Deformable Material Control: The platform will combine deterministic offline path planning with adaptive, real-time online sensory feedback (such as tactile, force-torque, and vision monitoring). This closed-loop configuration enables "search and settle" machine behaviors to dynamically correct for micro-misalignments and part variability on the fly. Sub-Millimeter Tolerances: The workcell will successfully execute precise connector insertion and blind-mate assembly steps within tightly constrained geometries to a targeted positioning tolerance of $\le$ 0.5 mm.Rapid Retaskability: The system will break the paradigm of dedicated single-product manufacturing by allowing shop-floor operators to ingest new geometric data and completely retask the workcell to a novel harness family in less than 8 hours.End-to-End Digital Thread: The workcell will generate machine-readable traceability records of every insertion force profile and routing path. This delivers a reliable data audit trail to eliminate quality escapes and predict latent field defects before they manifest in flight.Minim…

SBIR/STTR 은 미국 중소기업만 지원할 수 있습니다(Small Business Act 법정 요건). • 계열사를 포함해 상시 종업원 500명 이하 • 미국 시민 또는 영주권자 1인 이상이 50%를 초과해 직접 소유·지배 • 미국 내 사업장을 두고 주로 미국 내에서 사업을 영위할 것 • 수행책임자(PI)의 주된 근무처가 신청 기업일 것 출처: https://www.sbir.gov/faq/eligibility-requirements

주 대상 국가

🇺🇸 미국

추가 적격 국가

없음

해외기업 지원

불가

현지 법인

필수

지역 조건

미국 내 사업장을 두고 미국 시민·영주권자가 50%를 초과해 소유한 중소기업만 신청할 수 있습니다(법정 요건).

제출서류 정보가 수집되지 않았습니다 (확인 필요). 공식 공고문에서 직접 확인하세요.

신청 절차 정보가 확인되지 않았습니다.

평가 절차 정보가 확인되지 않았습니다.

신청 절차 정보가 확인되지 않았습니다.

Risk 분석 결과가 없습니다. Admin에서 재분석을 실행하세요.

IP 분석 결과가 없습니다.

공식 URL

https://www.dodsbirsttr.mil/topics-app/

신청 URL

https://www.dodsbirsttr.mil/topics-app/

최종 수집

2026.10.07

담당자 검수

미검수 (공고 원문 확인 권장)

최초 수집

2026.10.07

데이터 상태

자동 수집 (미검수)

AI 보강

확인 필요